On the older Classic (BI) series, 20 2 07 is a defrost bimetal error tied to the evaporator thermistor at the end of defrost.
Model compatibility: Sub-Zero reused visible code strings across series and model years, so 20 2 07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
On Classic (BI) units, 20 2 07 is a defrost bimetal error where the evaporator thermistor is not within the appropriate value at the end of the defrost cycle.
Code 20 2 07 is recorded as a defrost bimetal error. The condition behind it: the evaporator thermistor is not within the appropriate value when a defrost cycle ends.
At a glance
Code
20 2 07
What it means
Defrost bimetal error: the evaporator thermistor is outside the expected value at the end of a defrost cycle.
What you can check
Shut off the breaker for the unit, wait 30 seconds, switch it back on, and check the operation. That reset is the one step open to you.
When to call a technician
Book a service visit so the defrost bimetal and evaporator thermistor can be tested if the code returns after the reset.
Where it applies
It is listed for the Classic Series, formerly Built-In (BI) and the older built-in line. No Designer entry is given for this code.
Owner action
There is one step. Shut off the breaker for the unit, wait 30 seconds, switch it back on, and check the operation. If the code returns, book service.
EC06: the refrigerator evaporator thermistor open or shorted.
Service for your Sub-Zero
Should 20 2 07 return after the reset, our visits reach the Miami, New York, Houston, Los Angeles and San Diego metro areas. Book via Sub-Zero refrigerator service or call (844) 972-4767, giving the code and your model and serial number.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Sub-Zero appliance?
Book a specialist visit for a clear estimate and approval before any repair.